Prevents sagging and stress on motherboard. As graphics cards continue to get bigger and heavier, the need for a graphics card support to prevent the video card from sagging and causing motherboard or video card damage is needed. The Atlas BraceTM achieves this by supporting the GPU from the computer case itself.
Adjustable for different video cards! The Atlas Brace has over-sized screw holes that are larger than its three mounting screws. So it can be tightened down in the best pitch or angle to hold your card rigid and parallel. The holes are wider vertically so it can adjust up or down, adapting to thicker or thinner video cards. Installation instructions are included in detail with every brace to help you during installation.
Compatible with almost all motherboards and cases! When designing the brace it had to be beautiful, but also universal. As long as 1: your computer has two available expansion screw slots underneath your graphics card. 2: your case can accommodate a 10 inch graph-card. AND 3: your card protrudes away from the motherboard beyond the GPU mounting screws; then the Atlas brace should be compatible. This IS the case with most setups.The brace is NOT designed to work with dual graphics cards.
Low-key Matt Black aesthetic maintaining the look of your PC Perfect aesthetic, theme, and clean look of custom gaming PC build is the goal! We know that one minor detail can ruin the PC build, and a sagging video card is fixable issue. Our Atlas Brace is jet black acrylic. The front face is Matt Black with a discreet Logo on the bottom corner, achieving a non-intrusive, sturdy, even look. If this is something you're looking for please scroll up and add to cart. Happy gaming!
EDIT: Now all Atlas Braces WILL come with Black mounting Screws and Washers.
NOTICE: The Atlas Brace is NOT compatible with the Corsair 100R (contact us if you have issues with any other case).