0

Antminer S9 Bitcoin Mining Machine - Powerful Asic Bitcoin Miner Using 16nm Technology Capable of 13.5th/s @ 0.098 W/gh - Compact Design with 1600 Watts Regulated Power Supply with Overheat Protection

Price: $475.00
Product prices and availability are accurate as of 2019-01-24 02:52:12 EST and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 1-2 business days
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

*APW3++ POWER SUPPLY & 15ft C13 HEAVY DUTY POWER CORD ARE INCLUDED*

Warning: Must have 220v-264v power to run! If you only have 110v-120v power (standard power outlets in the US), then you cannot reliably power the AntMiner S9 with a single APW3++. We recommend using 2 APW3++ PSUs together when using 110v-120v power sources.

Specifications:
1. Hash Rate: 13.5 TH/s ±5%
2. Power Consumption: 1323W ±10%
3. Power Efficiency: 0.098 W/GH ±7%
4. ASIC Chip: 189 x BM1387
5. Dimensions: 350mm(L)*135mm(W)*158mm(H)
6. Cooling: 2x 12038 fans
7. Network: Ethernet cable is not included

Notes:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a replacement.
2. The AntMiner S9 requires TEN 6-pin PCI-e connectors. There are three hash boards that each require THREE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. All TEN 6-pin PCI-e power connectors are required. Do not connect more than one PSU to the same hashing board!
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4. One APW3++ Power supply is included with a 15ft C13 to Nema 5-15P power cord (14AWG).
5. Very LOUD! Sounds like a whiny vacuum.
6. Metal clanking or rattling is expected when moving the AntMiner S9. The sound is from the hashing boards moving back and forth against the metal frame. This does not mean there are loose parts and does not mean the item is defective.

Product Features

Bitcoin/Bitcoin Cash Mining Hash Rate: 13.5TH/s ±5% Power Consumption: 1323W ±10% Built-in web management portal - No separate host computer or software required APW3++ Power Supply Included with 15ft C13 to NEMA 5-15P Heavy Duty Power Cord (14AWG) Extremely Efficient: 0.098 J/GH ±7%

Write a Review