0

AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner with APW3++ 1200W@110v 1600W@220v / 10 Connectors PSU Power Supply In Stock Free Fast Shipping

Price: $255.00
Product prices and availability are accurate as of 2019-01-23 05:19:28 EST and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 1-2 business days
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

1.Scrypt Mining Hash Rate: 504MH/s (±7% is expected).
2.Compatible Coins: Litecoin and any other Scrypt-based coins.
3.Power Consumption: 800W (±10%) at the wall.
4.Noise level: Loud. Not for desk-top use. Sounds like a vacuum.
5.Chip quantity per unit: 288 x BM1485.
6.Rated Voltage: 11.60 ~13.00V.
7.Operating Temperature: 0C to 40C.
8.Network Connection: Ethernet (cable not included).
Notes:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.
2. Each AntMiner L3+ requires NINE 6-pin PCI-e connectors for 12V DC input (must be very stable power supply) There are four hash boards that require two 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All NINE 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Power supply unit is NOT included. Bitmain recommends the APW3++ power supply for the AntMiner L3+.
5. AntMiners are LOUD. The L3+ sounds like a vacuum and is not recommended for use within homes. Many people use basements or sheds, but returns due to noise will be subject to the full restocking fee.
6.Compatible Coins: Any coin based on the Scrypt algorithm. There are many dozen coins, but the most well known is Litecoin.

Product Features

Hash Rate: 504MH/s. A variation of +/- 5% is expected. Power Consumption: 800W +10% (at the wall, with APW3 PSU, 93% efficiency, 25°C ambient temperature) Power Efficiency: 1.6J/MH +10% (at the wall, with APW3 PSU, 93% efficiency, 25°C ambient temperature) DC Voltage Input: 11.60 ~13.00V APW3++ 1200W@110v 1600W@220v / 10 Connectors included

Write a Review